Scanmatik 2 PRO+AUX+Bench Cable J2534 VCI

Product Description

Scanmatik 2 PRO+AUX+Bench Cable J2534 VCI

Genuine Scanmatik 2 PRO + Aux  is a professional multibrand J2534/RP1210 device designed for diagnostics of electronic control systems of American, European, Japanese and Russian vehicles when used in conjunction with manufactures OE software’s and some after market software’s that are compatible with J2534/RP1210. It can be used as a J2534 device with a large number of diagnostic programs and flashers made for standard interfaces SAE J2534 and RP1210.

Note: This is not a scan tool, it is a J2534/RP1210 pass thru device to be used with other software’s that are not included with this device, 

Features

• Galvanic isolation of the USB port (with power).
• Redesigned protection of K-lines and CAN buses on a new element base.
• Increased speed of work via Bluetooth by about 20%.
• Pulsed power supplies of the company’s own design (no heating, wide input voltage range from 5 to 55V).
• Load-Dump power surge protection (when the generator is switched off on a running engine).
• The widest support of J2534-1/2 standards
• Supply of programming voltage (5-24V) to the OBD connector pins: 6, 8, 11, 12, 13, 14.
• AUX programming voltage output (via an additional cable).
• For full support of peripheral units on GM (GDS2) and VAZ/Renault cars
• An additional CAN bus on pins 12-13 running in 12H-13L or 12L-13H configuration.

The device works with a personal computer, tablet or smartphone. The software for Windows and Android are included in the package. When installing the driver (included) works with third-party software made for SAE J2534 and RP1210 standards. To connect to the adapter both USB and Bluetooth interfaces can be used (built into the Scanmatik 2 PRO adapter). The kit includes the full current version of the program (all currently available software modules): VAZ, GAZ, UAZ, Oka, ZAZ, Daewoo, Chevrolet, Ravon, Chery, BYD, Geely, Great Wall, Lifan, Mitsubishi, Kia, Hyundai, Izh, KAMAZ, MAZ, PAZ, OBD2. It works with a large number of diagnostic programs and flashers made for standard interfaces SAE J2534 and RP1210.

SM2-PRO Adapter Specifications

• Interfaces for communication with PC (Tablet, Smartphone) – USB or Bluetooth.
• Power supply voltage: 5… 36V from the vehicle network or USB (galvanic isolation with power supply).
• Current consumption, not more than 350mA.
• Pulsed power supplies of the company’s own design (no heating, wide input voltage range from 5 to 55V).
• Load-Dump power surge protection (when the generator is switched off on a running engine).
• Supported data buses: 13 x ISO-9141/ISO-14230 (K-LINE), 1 x J1850VPW, 1 x J1850PWM, 4 x CAN, 1 x Single Wire CAN.
• Built-in multiplexer for switching diagnostic lines.
• The widest support of J2534-1/2 standards.
• Programming voltage supply (5-24V) to the OBD2 connector pins: 6, 8, 11, 12, 13, 14.
• AUX programming voltage output (via an additional cable).
• Bluetooth range, not less than: 10m (Class 2).
• Adapter dimensions (L x W x H), not more than: 97×75×22mm.
• Weight of the device in the basic configuration, not more 1 k.

Included with this set is the universal 53 & 71 module cable (boot/bench) for Scanmatik 2 Pro
See details about this cable below

Features

• The adapter has reverse polarity protection
• Power supply indicator (green), Power supply for ECU indicator (red), Boot mode indicator (blue)
• Automatic power supply switching for ECU by (L-line)
• Automatic generation Boot (2 pc.) and CNF(for 53 module).

Boot cable PINOUT:

• red +12V (1 big connector(2.5mm) и 2 small connectors)
• black GND (1 big connector (2.5mm) и 1 small connector)
• white CAN H (1 small connector)
• green CAN L (1 small connector)
• yellow + black line (with green shield) K-Line(1 small connector)
• yellow GPT1(1 small connector)
• orange GPT2(1 small connector)
• violet VPP
• blue CNF1(for 53)( crocodile terminal, 1KOhm)
• grey boot1(for 53)( crocodile terminal, 1kOhm)
• brown boot2(for 53 )( crocodile terminal, 1kOhm)